|
207-775-5510
Download Line Card
| |
| |
|
|
Water-Soluble Machining
Fluids
Formulated with oils and emulsifiers, water-soluble oils combine the
lubricity of cutting oils with the cooling ability and economy of
water dilution. In addition to yielding finer finishes, water-soluble
oils are also compatible with virtually all types of machinery and
metals. They prevent rusting by providing a thin layer of oil film,
and prevent rancidity and extend sump life through the use of
biocides. |
Biostable Coolants
Biostable products control bacterial and fungal growth, resulting in
level pH performance and reduced biological degradation. Frequent
dumping of the sump because of rancidity is eliminated, and no
additional biocides are needed. Biostables are available in
water soluble,
semi-synthetic, and
synthetic formulations. |
|
Semi-Synthetic
Machining Fluids
Semi-synthetic
machining and grinding fluids are synthetic-based coolants that
typically contain some oil for added lubricity and corrosion
protection. This makes them ideal for light-to-moderate machining and
grinding applications. Semi-synthetic coolants also offer many of the
same advantages as synthetics. |
Synthetic Machining
Fluids
Full synthetic
coolants utilize a soluble combination of synthetic lubricants and do
not contain any petroleum additives. Synthetics offer a number of
outstanding advantages, including extended sump life and exceptional
performance. In addition, synthetics offer superior cooling
capabilities for extended tool life and reduced heat distortion.
Synthetics also repel tramp oil and make its removal easy and less
costly. |
|
Corrosion Preventatives
Rustlick 606 is a
moisture-absorbing
corrosion preventative which can be applied to porous, wet surfaces,
reducing surface preparation time. It leaves a light, oily,
transparent film on all metals during indoor storage which can be
easily removed by wiping, alkaline washing, or vapor degreasing.
Rustlick 606 is excellent for porous or configured metals.
Available in 12oz. aerosol cans, 5 gallons, and 55 gallons.
TDS |
MSDS
Rustlick
631 is a
moisture-displacing
corrosion
preventative
designed for long-term use in environments which may include acid and
salt vapors. It spreads into scratches and pores to displace moisture,
leaving a light, oily film, and is easily applied and removed,
non-conductive, and safely used on electrical parts. Available in
12oz. aerosol cans, 1 gallons (4 per case), 5 gallons, and 55 gallons.
TDS |
MSDS
Rustlick
B is a water-soluble corrosion inhibitor designed to prevent
in-process rusting of ferrous metals. It leaves a non-oily, dry,
microscopic protective film and can be used for hydrostatic testing
and vibratory finishing. Biodegradable, transparent, and
non-irritating, Rustlick B is not subject to bacterial
decomposition or rancidity and does not require removal prior to
painting, plating, or assembly. Available in 5 gallons and 55 gallons.
TDS |
MSDS
Download Datasheets |
| Information Request |
|
-
...
|
