Programmable Flood Coolant Nozzle System For Machining Centers
The SpiderCool system is a programmable coolant nozzle that automatically aims a higher volume coolant stream at the cutting edge of every tool, regardless of length, loaded into the spindle of any vertical or horizontal machining center by the tool changer. We refer to the system as "programmable," but "teachable" is a more descriptive term because the nozzle positions are actually set and memorized by using the servo adjustment knob (below) conveniently located on the machine s control panel. "G Codes" or "M Codes" are not used.
How do you program SpiderCool?
The machinist simply “teaches” SpiderCool by turning the adjustment knob to precisely aim the coolant stream. This is done once for each tool in the machine. From that point on, coolant adjustment is automatic. There are no M-Codes to write into your program, and adjustments can be made and re-memorized at any time during the machining cycle.
The machinist simply “teaches” SpiderCool by turning the adjustment knob to precisely aim the coolant stream. This is done once for each tool in the machine. From that point on, coolant adjustment is automatic. There are no M-Codes to write into your program, and adjustments can be made and re-memorized at any time during the machining cycle.
Copyright 2012 - Northeast CNC, LLC - All Rights Reserved
Send mail to webmaster@necnc.com with questions or comments about this web site.
Send mail to webmaster@necnc.com with questions or comments about this web site.
Serving The New England Region
New location and address.
Northeast CNC
Gorham Industrial Park
36 Bartlett Rd, Unit 1
Gorham, ME 04038
Tel 207-775-5510
Northeast CNC
Gorham Industrial Park
36 Bartlett Rd, Unit 1
Gorham, ME 04038
Tel 207-775-5510